|
|
Medical center Hlinsko
Pilný, Ondřej ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.
|
|
|
Auto show
Václavík, Marek ; Moravcová, Eva (referee) ; Matějka, Libor (advisor)
This thesis covers brand new detached showroom with one basement and two floors. The building is divided into 2 parts, the major part of the first floor sample room (showroom) for a maximum of 13 vehicles, offices and staff facilities salon. On the second floor is located the finance department and exemplary service area. In the basement of this building are public parking garage for 16 vehicles and car accessories stores. The second part of the new building is just overhead. It consists of a private car service for 5 vehicles, stock tires, utility room, car wash and storage of spare parts for cars. Flat roof supporting structure is made of pre-stressed girders reinforced with cross reinforced concrete slab with insulation. Cladding are ventilated insulated facade, supporting part is reinforced. The showroom form the majority of the building envelope glass facade. Finish of floors in office and showroom premises are ceramic tiles. In the Service and garages cast floor resistant to petroleum substances.
|
|
|
Extension of School
Jirčík, Jakub ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The content of the thesis is a static design of the supporting parts of the extension of the textbook pavilion of the elementary school in Mirošov. The proposed building is a four-storey reinforced concrete monolithic column construction. The ceilings above the first three floors are designed as cross-reinforced slabs with internal girders. The roof slab consists of a monolithic slab with additionally prestressed beams. The internal forces were calculated using SCIA Engeneer 19.0 and these values were subsequently verified by manual calculation. The design followed the applicable European standards. The result of the work is a static assessment of the object and corresponding drawing documentation.
|
|
|
Static solution of a floating concrete pier
Dorňák, Josef ; Nečas, Radim (referee) ; Zich, Miloš (advisor)
The bachelor´s thesis deals with the design of a floating concrete pier to be used for landing of helicopters of the Medical Rescue Service of the Czech Republic. The basic for the thesis was a study of the structure with plan dimensions, location on the river and a longitudinal section of the structure with elevation marks. The aim of the thesis is to desing a cross-reinforced slab and walls. In total, the structure consists of 8 identical components. To calculate the internal forces, a 3D model supported by an elastic substrate of calculated stiffness was created the Scia Engineer 22.0. Based on the outputs from the program, the flexural reinforcement was designed. Using non-linear calculation, the structure was assessed for serviceability limit state and the results were compared with the manual calculation of crack width. Handling and anchoring handles were also designed. At the end of the thesis, the connecting element was assessed and its reinforcement was proposed. The theoretical part, static calculation and drawing documentation are part of the thesis.
|
|
|
Extension of School
Jirčík, Jakub ; Hrubý, Tomáš (referee) ; Požár, Michal (advisor)
The content of the thesis is a static design of the supporting parts of the extension of the textbook pavilion of the elementary school in Mirošov. The proposed building is a four-storey reinforced concrete monolithic column construction. The ceilings above the first three floors are designed as cross-reinforced slabs with internal girders. The roof slab consists of a monolithic slab with additionally prestressed beams. The internal forces were calculated using SCIA Engeneer 19.0 and these values were subsequently verified by manual calculation. The design followed the applicable European standards. The result of the work is a static assessment of the object and corresponding drawing documentation.
|
|
|
Medical center Hlinsko
Pilný, Ondřej ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.
|
|
|
Auto show
Václavík, Marek ; Moravcová, Eva (referee) ; Matějka, Libor (advisor)
This thesis covers brand new detached showroom with one basement and two floors. The building is divided into 2 parts, the major part of the first floor sample room (showroom) for a maximum of 13 vehicles, offices and staff facilities salon. On the second floor is located the finance department and exemplary service area. In the basement of this building are public parking garage for 16 vehicles and car accessories stores. The second part of the new building is just overhead. It consists of a private car service for 5 vehicles, stock tires, utility room, car wash and storage of spare parts for cars. Flat roof supporting structure is made of pre-stressed girders reinforced with cross reinforced concrete slab with insulation. Cladding are ventilated insulated facade, supporting part is reinforced. The showroom form the majority of the building envelope glass facade. Finish of floors in office and showroom premises are ceramic tiles. In the Service and garages cast floor resistant to petroleum substances.
|
guest ::
